11/23/2023 0 Comments Fire safety signs![]() ![]() The colours are used to convey the mandatory nature of the instructions but because of the amount of text typically needed, a rectangular format is used. Thus the familiar white-on-blue fire safety mandatory signs using text only will remain in place and will not have to be changed.įire instruction notices are notices which list actions that occupants must carry out in the event of a fire and are, by convention, written in white text on a blue background but not in the circular format. There are no pictograms for fire safety instruction signs and although mandatory in the UK through inclusion in the requirements of workplace fire assessments, such signs are not considered health and safety signs within these Regulations. The minimum regulatory requirement is for the sign to display appropriate imagery. It should be noted that the Health and Safety (Safety Signs and Signals) Regulations 1996 do not apply to mandatory fire instructions but do apply to health and safety mandatory signs where imagery is required. An area of a construction site where hard hats should be worn should also have appropriate signs at the entry points. For example, self-closing fire doors that must be kept closed to comply with the fire risk assessment should be labelled with “FIRE DOOR KEEP SHUT” signs. These signs should be used to indicate actions that must be carried out in order to comply with statutory requirements. “Personal Protective Equipment Must Be Worn”) As mentioned in the Fire Action Notices, you will see prohibition notices when outlining what not to do in the event of a fire.A safety sign prescribing specific behaviour (e.g. The most common one of these signs you’ll have seen in the ‘No Smoking’ sign, which will be especially prominent in areas where there are flammable materials nearby. Prohibition signs are made up of a white sign with a red circle and diagonal line, creating the classic ‘Do Not’ symbol over an image. Normally, blank spaces are left on these signs to allow workplaces to write bespoke locations for assembly points and who to report things to. Sometimes called ‘Fire Action Notices’, they provide vital information of what to do in the event of a fire, including colour coded instructions of where to do and what to look for. ![]() These will typically carry the words ‘Danger’ or ‘Caution’ to reinforce their importance, as the substances can cause major damage if improperly handled.īlue signs provide notice of instructions relating to fire safety, including what to do in the event of a fire. Yellow signs indicate a dangerous substance in the vicinity which you should be cautious of. Some of these will be backlit to allow for better visibility in the dark and ensure people can find escape routes in almost any conditions. Green signs convey the location of doors, exits and escape routes used for emergency escapes. These signs may also carry additional information about the correct usage of the respective firefighting equipment, such as prohibited methods of operation. This includes fire extinguishers, fire blankets, fire hoses and fire buckets. Red signs signify the location of firefighting equipment, allow for easy identification in an emergency. – Visual markers for where firefighting equipment is locatedĪll fire safety signs fall into one of four main categories, each with a distinctive colour associated with their respective area of fire safety. – Information on emergency exits and escape routes As part of the Regulatory Reform (Fire Safety) Order 2005, a number of different fire safety signs should be utilised on-site to provide the following: ![]() Each workplace should have an established fire safety plan which every staff member is made aware of. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |